An In Wall Electric Fire Place
A wall-mounted electric fireplace can provide an attractive and warm ambiance to your living space without requiring venting or gas lines. These fireplaces are also very safe and easy to install.
They can be hung with special brackets to mimic a picture or framed into the wall to give a more traditional look. The installation of recessed lighting requires framing and a more complex electrical connection. However, the majority of homeowners are able to handle this themselves.
Going On this page
If you follow the guidelines of the manufacturer an electric fireplace is safe to use in your home. Always keep flammable substances at least a foot from the unit, and you should never leave it unattended. Keep a fire extinguisher near the device to quickly eliminate any flames. You should also avoid placing liquids in close proximity to your electric fireplace. Also, ensure it's not in the same place as your computer or other electrical appliances.
Electric fireplaces do not emit harmful carbon monoxide or gases, unlike gas fireplaces. They are also much more sustainable than traditional fireplaces, which rely on fossil and wood fuels to create heat and flames. Electric fireplaces do, however, have a footprint as they need electricity to operate. The positive side is that the majority of electricity is generated from renewable sources, such as wind turbines and hydroelectric dams.
A wall-mounted electric fireplace is great because it doesn't require a chimney to work. You'll only require an electrical outlet and a plugged in to be connected to the wall. This makes it simple to install an electric fireplace in virtually any room of your house including the kitchen and bathroom.
When you are looking for a wall-mounted electric fireplace be sure to check its power and BTU rating. These are crucial factors since they determine the temperature of the fireplace and also how much you will have to pay for its operation. The wattage of the fireplace will also determine how big an area it is able to heat.
Find models with safety features, such as fire retardant glass and an emergency shutoff switch. These features will prevent accidents and injuries while using your fireplace. It is important to read the instructions and follow them exactly. In addition, it is recommended to disconnect the fireplace whenever it is not in use to prevent overheating and save energy.
Appearance
A wall-mounted electric fireplace can be a great option in the event that it's impossible to install a wood or gas-burning stove. They are smoke-free, safe, and do not require any maintenance as a traditional fireplace. The majority of models also come with an additional source of heat, meaning you can use them all year round. Some offer a choice of flame and ember bed shades, so you can customize the look of your fireplace to fit your decor.
A majority of these units are designed to blend in with your wall and provide an elegant, subtle appearance. They can be placed on an unfinished wall or above a mantel, and they're easy to turn off and on by pressing one button. Some even come with remote controls to make it easier. Certain models can be fully or partially recessible in the wall and some have built-in heaters.
There are a variety of brands of these products. However it is crucial to look at the quality of the fire effects and heating. Avoid common fireplaces since they are usually low-quality, and will leave disappointed. Select high-end brands like Dimplex, Northwest Touchstone and Simplifier. You'll get the most performance and look from your new wall-mounted fireplace.
The Allusion is a perfect example of a sleek and minimalist design for a moderate price. The Allusion is a simple sleek frame that is complemented by an ember-like crystal bed, as well as an optional driftwood log set. It is a popular option for anyone looking to incorporate modern features into their home.
Another great option is an alternative to the Scion Trinity, a unique multi-sided fireplace that combines a wide viewing area and huge amounts of glass with no visible vents or finishing materials around the edges. This allows you to put artwork or televisions above it without having to worry about the hot air rushing down on them.
MagikFlame also offers a range of 3D fire projection fireplaces that appear real. The 3D flames are projected directly onto the log sets. This creates a truly stunning effect. This kind of electric fireplace is a great option to transform your home into a beautiful, relaxing retreat.
Energy efficiency
Electric fireplaces are a practical alternative that is safe and secure to traditional wood-burning or gas-fueled fireplaces. They employ a highly efficient heating element that converts almost all electricity into heat and require no venting, which results in significant energy savings. Additionally, they do not produce soot or ash, and are easy to clean. A lot of them have an adjustable flame that allows you to adjust the brightness and intensity to match your mood.
Installation is simple and does not require extensive repairs or chimney installation. In most cases, all you need is an outlet on the wall and a place to connect the unit. They also come with TV safety, which means you can put your flat-screen television on the mantle and not worry about it getting damaged by the increasing heat or smoke. They are also very cost-effective and require minimal maintenance when compared to their counterparts using wood or gas.
Certain models have an integrated thermostat, which allows you to set your preferred room temperature and control the fireplace's heating output. Some models have timers that allow you to program when the fireplace should be turned off and on. These features make them a fantastic alternative for zone heating. This will help you save money by reducing the heating of unoccupied spaces.
The majority of modern electric fireplaces are built for ease of use, with some able to be mounted on the wall or inserted into existing structures like TV stands and entertainment centers. They don't require ventilation or complicated installation, which makes them the perfect choice for homes with limited space. Some of them are also compatible with remote controls, allowing you to operate and adjust their settings from a distance.
One of the most crucial aspects of an in-wall electric fire place is its energy efficiency. It is recommended to choose a model with a high BTU rating to ensure it will effectively warm the space that you are heating. It's also important to consider your home's power consumption, because some electric fire places require more energy than others.
Electric fireplaces do not release any direct emissions, unlike traditional wood-burning fire places. Instead they emit a tranquil glow that is as beautiful to the eye as flames that actually exist. They are also more secure and less maintenance-intensive compared to traditional wood-burning fire places since they do not require combustibles or chimneys.
Installation
A wall-mounted electric fireplace can be set up in a variety of ways. You can build walls specifically for the fireplace or use a trim kit. In either case, you should follow the installation guidelines and have a professional electrician upgrade your electrical system to accommodate an electric fireplace.
The most important thing to keep in mind is that fireplaces don't require a chimney, flue or vent. These fireplaces require only an outlet near by. They also don't require gas connections and can be installed in any room, without the danger of carbon monoxide poisoning. This makes them a reliable and safe alternative to wood-burning fireplace places.
A concealed electric fireplace is one of the most well-known options for electric fireplaces mounted on walls. This option may not be available for all fireplaces, so check the site of the manufacturer to find out whether your fireplace is compatible. Installing a freestanding fireplace is a great choice for smaller spaces.
The majority of fireplaces can be plugged in a standard electrical outlet. However, it is recommended to have a licensed electrician check the wires prior to installation. This will ensure that the wiring is in compliance and that you have a properly grounded plug for your fireplace. It is also recommended to run the electric fireplace on a separate circuit to prevent it from tripping a breaker.
Installing the fireplace is done after you've completed your electrical work. It's likely to require two people to put in the fireplace, since you'll have to lift it and insert it in the opening. Once you've completed that, you'll need to secure the mounting bracket into studs.
When you are putting in the fireplace, you should be extra cautious, especially if using an edge kit. It is essential to ensure that the fireplace isn't blocking any doors or windows, and that there is enough room for the heat vents. Most electric fireplaces have an absolute clearance of 2 feet from any combustible materials So, you should consult the manual of the fireplace for the required clearance requirements.